Editing the ROPOT description

Once you have created a question set, access the work with ROPOT pages using Click on "Create a new ROPOT description" and select the mode (exercises, PC-based test, ...) according to the intended use. The choice of mode affects the presetting of less relevant options with typical values for that use. If the course already contains some ROPOT descriptions, you can use one of them as a template and have the new description preset according to it. Just select the description in the list instead of selecting a specific mode. Finally, press the "Select" button to enter the form to enter the parameters.

The description of the ROPOT has the extension .qdesc (questionnaire description). By default, it is stored in the study materials in the folder ROPOTs/testbank, which students do not have access to. If you want to change this location, click the "Change" button located right at the beginning of the description next to the existing address.

The first three items on the form are the name of the ROPOT, the file name and the question set selection.

• Name of the ROPOT application: preferably short and concise; if you wish to save student scores in a notebook, the ROPOT name must be no more than 32 characters.
• Name of file: optional, the IS can create it itself.
• Question set to be used: to enter a set, click on the "Select from all question sets" button. This will display a list of all available question sets in the course, in which you mark the ones you want to use and confirm by clicking "Use the selected". In case you want to insert a set that is not in the Study Materials, enter its address in the box below the "Select from all question sets" button and click "Use" (the "Find" button will help you find the address).
  

  

You can use several question sets in one ROPOT at the same time. The procedure is basically the same as for the first question set.

You can specify the order in which the questions of each set should be in succession - write the desired order in the box in front of "set order" in the grey rectangle.

You can also specify how questions from the set should be selected for the test if you are selecting only a subset of the questions from the set. You can choose either to select them "randomly", to "start from the question", or to take "a block of continuous questions".

Random means that a given number of questions are randomly selected from all questions in the set.

Start from the question means that a given number of questions are selected in the same order as they appear in the set, starting with question X. In the case of non-completion, start with question 1 in the set.

A block of continuous questions means that it is possible to take into account cases where there are always the same number of related questions in a set of "tasks". The number of questions that form a continuous block in the set is entered (the total number of questions in the set must be divisible by this number). Just one randomly selected block of continuous questions from the set is used.

You set the order of the questions in the student's test (in the session) in the next step in "Order of questions in a new session".

Once a student has launched the ROPOT and created a session in it (or an assignment for a scannable test is created), the assignment is kept unchanged even if some of the questions are later changed or removed by the teacher. In the Responses application, it is thus always possible to see exactly what the questions looked like when the student answered them.

You can enter instructions for using the ROPOT and other information (maximum points, where students can find the results, etc.) in the "ROPOT application instructions" field. Students will be shown these before launching the ROPOT application.

If you do not wish to use the scoring (e. g. for polls or surveys), tick the "do not award any points" box. Otherwise, enter the default number of points awarded for a correctly answered question (ok).

Do you have a score given in the question set? The point values given directly in the question set carry more weight and "override" the ROPOT settings. For example, if you have 1 point in the ROPOT description, but you have two points ("ok 2") for a difficult question in the set, the student will get two points for a correct answer.

You can also set subtraction of points for wrong answers or unanswered questions.

In the ROPOT description, just chose "save/yes" in the "Saving students' scores to a notebook" section in combination with the default score setting. IS VŠFS will automatically create a notebook where the number of points awarded will be saved. Only points are transferred, not, for example, free-form answers.

The "yes" option is further divided into the following options:

• "Save only the score of the last ROPOT session (last test)": this option is mainly used when setting "Yes, they should, but it is always the same form (same questions) that should be offered to them". However, you can also use this option if you are repeatedly setting up new tests, if only the most recent result is important for you and for the students.
• "yes, only the best result (of all the ROPOT sessions)": this option is most often used in combination with "Passed/failed evaluation". The student launches the ROPOT application repeatedly in order to achieve a certain number of points.
• "yes, only the worst result (of all the ROPOT sessions)": used when you want the student to answer only once but have the option to launch the ROPOT application a second time, e.g. in case of a failure. It cannot be used in combination with the "Passed/failed evaluation" option.
• "yes, the results last submitted of all the sessions": only makes sense if you intend to allow students to repeatedly launch new, blank tests (see below). If they take the test once and then just correct the answers (i.e. "update the same form"), the score is always overwritten by the last result.
• "yes, all the results submitted of all the sessions": used in cases where the student passes the ROPOT repeatedly and it is desirable to record the results of all answers concerning one ROPOT. For example, you can keep track of whether the student is continuously improving or deteriorating while completing the test.
• "Save only the score of the last ROPOT session (last test) and the scores gained for individual sets": use this option in exceptional situations where you need to differentiate the points earned from each question set.

If you do not want to publish the notebook to students immediately, check the option "do not make the notebook contents available to students yet". For subsequent publication, choose the "Allow students to access the contents of the notebook" option in the notebook settings. If you do not want the notebook, check "No, do not save the scores to a notebook".

If the student's answers are not saved correctly (for example, due to a connection error), his/her results will not be entered into the notebook. You can use the "End session in progress" option to additionally enter a partial score (if the student used the Save and continue button in the ROPOT). Select

To determine the minimum number of points a student must earn and then check if the limit has been met, enter the required number of points in the "a pass score or pass percentage" field in the “Passed/failed evaluation" section. You can also enter the number of points required to pass the test as a percentage. For example, if you enter "75%", the test will be scored as a pass if the student earns 75% or more of the maximum number of points. At the same time, you need to set the results to be written in a notebook (in the "Saving students' scores to a notebook" section, tick "yes, only the best result (of all the ROPOT sessions").
If a student achieves the minimum score in one of the ROPOT sessions, a *1 will appear in the notebook, which in this case means "passed", not the number of points obtained. If the student does not achieve the minimum number of points, the student will have a *0 in the notebook.

Expressing the achievement of the minimum score in terms of ones and zeros makes it easy to see how many ROPOTs a student has completed by adding up the notebooks. You can also list students who have or have not achieved the required number of points. When selecting a course in the "Teacher" agenda, also select the filter "other - students" and specifically "selected by their score recorded in a notebook". Then tick the required notebook and enter the number of points. For a listing of students who have passed the ROPOT requirements, this will be "=1" and for a listing of students who have not passed the ROPOT requirements, this will be "=0". The Teacher's notebook with the selected students will be displayed when you click on "Select".

Information about meeting the limit is also displayed to students. At the link to the ROPOT:

is displayed in green "condition met" or in red "condition not met".

Beware of settings in which you combine the percentages set in "Passed/failed evaluation" and any of the options "yes, the results last submitted of all the sessions" or "yes, all the results submitted of all the sessions" in the "Saving students' scores to a notebook" section. With this setting, the sesion is evaluated by taking the maximum points that the responder could have earned as the basis for calculating the percentage and comparing that to the points actually earned.
Example: a maximum of 10 points can be earned on a test and it has to be completed to at least 80% in order for the student to find "*1 completed" in the notebook, however, the notebook is set to store all the results submitted of all the sessions. A student who has one session in this test has to score at least 8 points to find "*1 pass" in the notebook. A student with two sessions needs to score at least 16 points in total, a student with three sessions must score at least 24 points in total, etc.

They may or may not be. You can specify in the ROPOT description whether you want to mix the order of the questions. There are three options under the setting "The questions should be presented in the following order:"

• random – randomly shuffles all questions (if you use multiple question sets and have a set order, questions are randomly shuffled from all of them regardless of the question set order!)
• in the same order as that of the question sets they make up, but blended randomly within each of the sets – used when using multiple sets – randomly shuffle questions from the set while maintaining the question set order (if specified). So first the questions from the first question set will be randomly shuffled in the test, then the questions from the second set will be randomly shuffled, etc.
• in the same order as they can be found in the set – if you don't use all questions in the question set, the first n questions in the set are selected in the order they are defined in the definition file. If you are using all questions from the question set, they are used in the exact order they appear in the definition file.

If you do not fill in the "position of the set" field, the question sets are used in random order.

You can also decide whether you wish to mix up the order of the options from which students choose the correct answers. Then you don't have to worry about putting the correct answer in the same place every time you create a question.

This also depends on your choice. Access to the correct solution is set in the "Display the correct answers to students after they have finished working with the ROPOT application" section:

• display answers to correctly answered questions only: if you tick this option, the correct answers for incorrectly answered questions will not be displayed. The student will only see that he/she answered the question incorrectly. If he/she is allowed another session, he/she can try to answer the question better.
• immediately after the submission of answer form:once the student has submitted the test, he/she will be able to see the correct solution and the points obtained by clicking on the "View" button.
• display automatically right after the users have finished working with the ROPOT application: immediately after submitting the test, the student will be automatically redirected to the page with the correct solution.
• after the period during which the ROPOT application can be worked with: the student will see the correct solution after the period during which the ROPOT can be worked with (see below). Until then, the student will not see the scores for each question. If you still want to tell him/her the overall result, use the transfer of the scores to the notebooks (see above).
• never: the student will not see the correct solution, a typical setting for real testing. It can be enabled to show scores in the session list.
• display all the answers after x attempts (unless all the questions are answered correctly earlier): the aim is to make students think more about their possible mistakes in the practice test by preventing them from viewing the correct results immediately after the first attempt. Instead, they have the opportunity to take the test several times, knowing that they did not get everything right. If an option is set that allows multiple different sessions to be generated at the same time, attempts are counted separately for each session generated.
  
  Tip

  This number of attempts limits only the access to the answers; the student may do the actual answering in more attempts than is the number entered here.

• only from – to (this option is not recommended): the student can only open the correct solution view at the set interval. (If you select the option and do not fill in the values, the student will always view the solution.)
  
  Note

  The time limit for displaying the correct answers does not guarantee that students will not take pictures, email them, etc. Therefore, do not use this option if you have a serious interest in keeping the correct results secret.

You can set the possibility to work with the ROPOT repeatedly in the section "Should students be allowed to access this ROPOT application repeatedly?":

• maximum number of times the test can be evaluated (if no number is provided, no limit is applied): the number of test evaluations does not include saves (using “save and continue” button), because these do not result in an evaluation of the test. The test is scored only after it is submitted.
  If you need to count the number of times the ROPOT is launched instead of the number of times it is evaluated, tick the option "count the number of times the ROPOT application (test) gets opened (not evaluated)“.
• Yes, they should and some other questions should be offered to them next time they work with the ROPOT application: the term "session" means that the student launches a blank, new test. You can set this parameter even if you use all the questions in the question set. In that case, the student will have a clean test in front of him/her again and will have to fill in everything again. If you use only a certain number of questions, the student will work with variations of the test (the selection of questions is random!). For this option, you can disable the ability to answer sessions already launched.
• Yes, they should, but it is always the same form (same questions) that should be offered to them: this means that a student can only take the new test once. After that, he/she can only correct his/her answers, he/she will never have a blank test in front of him/her again.
• no (once you open the ROPOT, you cannot reopen the ROPOT sometime later and change the answers): this is a typical option for testing. Re-opening is not possible even before final submission.
• No, never (select this option provided the test is to be scanned and you only want to make it available for browsing): this option will not allow the student to lauch the test. It is only used for scanable tests where the tests are written on paper. You can make the view of the tests available in the "Display the correct answers to students after they have finished working with the ROPOT application" section.

You can split the ROPOT into pages. In the description in the "Number of questions per page" section, you can specify how many questions to display on the page (screen) or whether to use a single page for questions from one question set only.

Students use buttons to switch between pages. Pagination can also make it difficult to copy from a neighbour's screen. In addition, when moving from one page to another, there is an automatic intermediate save. At the same time, if you check the "do not allow students to return to the previous page" option, the student will not be able to return to previous questions and edit their answers after moving to the next page.
Pages can also be divided by question sets (by selecting "use a single page for questions from one question set only"). One page will then contain continuous blocks of questions that are drawn from one question set.

In the "Rights and times group" section, you need to set who is allowed to work with the ROPOT. Select the desired option via the "Add another right" button and click on "Add the right and make further specifications". If you have selected e.g. "students enrolled in the course offered in a concrete term", you have to confirm the selection once more by clicking "Add the right". If the operation was successful, the message "No access rights have been specified for this ROPOT application yet and thus no one is allowed to work with it at the moment." will disappear and a table with the details of the assigned rights will appear.

It is also possible to specify several different rights within one time and rights group.

There are two basic options: specifying the from-to interval and the total number of minutes the ROPOT can be worked with.

• Setting the from-to interval (period during which the application can be worked with)
  You can select the date and time from and until which the ROPOT can be worked with. You can either enter both data or only one of them. You can set more than one interval for accessing the ROPOT.
• Setting the total time for the test
  Another option is to specify the total number of minutes that the ROPOT can be worked with. The time is counted for each person separately from the moment the ROPOT session is first launched. Although the teacher can set the student to return to the ROPOT session and work with it repeatedly, the total time is still counted from the first time the ROPOT session is launched.
• Combining the two methods
  You can combine both types of time restriction. The limit that expires first will apply. For example, you have a ROPOT where the interval is set to 15:00 to 16:00 and 10 minutes. If a student launches the ROPOT at 15:55, they will only have 5 minutes to answer it. If he/she opens it at 15:00, he/she will have 10 minutes.

The combination of time constraints can be used, for example, in real examinations for grades. For example, you want to give students 30 minutes of time and at the same time you don't want students to lose some of their time due to a delay in the start of the test. In such a situation it is convenient to set the interval e.g. 10:00–11:30 and at the same time the total number of minutes to 30. Each student will have 30 minutes to work and it does not matter whether he/she opens the test at 10:00 or 10:05. Only students who open the test at 11:01 or later would be disadvantaged.

You can do the same in tests designed for practice during the semester. For example, you want students to work with the ROPOT repeatedly over a period of time (e.g., March to May), but only for a limited amount of time (e.g., 20 minutes). In this type of testing, you need to have the parameter "yes, they should and some other questions should be offered to them next time they work with the ROPOT application". This is because if you set it to "yes, they should, but it is always the same form (same questions) that should be offered to them", the time from the first time the ROPOT session is launched is counted. In our case, if the student saved the test after 10 minutes and came back to it after half an hour, he/she would not be able to work with it anymore because the 20 minutes would have passed in the meantime.

Multiple periods during which the ROPOT can be worked with is useful in the case of tests on multiple dates for different groups or seminars within a course or courses using shared study materials. This eliminates the need to create multiple ROPOT descriptions for a single test that is intended for different groups of students. It is also important that all groups of students who are to work with the ROPOT at a given time also have the appropriate rights assigned. For example, you want to give one test to two groups of students. The first examination date is at 10:00, the second at 14:00. In the ROPOT description, you set the date and time in the first line to, for example, 10:00–11:00, and in the second line to 14:00–15:00. Thus, one description is used for two examination dates.

With both types of time constraints, the student can see how much time is left. For the last 5 minutes, a red warning appears on the counter indicating the end of the test and flashes for the last minute.

Different combinations of times and rights can be set within a single ROPOT description.

For example: a teacher teaches three seminar groups on a different day each, and he/she wants to set up one ROPOT for all groups so that only students from a particular seminar group can always launch the ROPOT on the day the seminar group is taught.

For each seminar group, via the "Add another rights and time group" button, the teacher inserts a section within which he/she sets the right for the specific seminar group and sets the time when the student is allowed to launch the ROPOT session.

This way, the teacher doesn't have to set up three different ROPOTs, but just one.

You can also add a special rights and time group. This option is mainly used to set up ROPOTs for students with special needs (typically used by Teiresias).

If the student does not submit the test within the time limit, the system will do it automatically when the time limit expires. This feature does not need to be set up, but it cannot be cancelled either. In this case, the student just needs to wait for the ROPOT application to notify him/her of the automatic submission with a message in the modal window. It is a good idea to inform students of this fact when taking the test.

In order to avoid cases where a student accidentally fails to submit a test for some reason (e.g. due to a computer crash or internet connection failure), students can use the "Save and continue" feature when completing the ROPOT. In this case, when the ROPOT session is launched again, the student will have their previous responses saved as they were when they last saved continuously. If you want to minimize the risk of a student accidentally losing their answers while completing the ROPOT, it is a good idea to warn students of this feature in advance.

ROPOTs are automatically continuously saved to all students approximately 10 minutes after the last continuous save (or open operation).

You make the ROPOT available to students by both assigning rights and creating a link to the ROPOT. If you want to test the ROPOT before publishing it, then do not set the rights yet and save the description using the "Save and make inaccessible to students for now" button.

Only when you decide to publish the ROPOT, proceed via

again in the ROPOT description. First, set the access rights (see the question I want to set who is allowed to work with the ROPOT).

The next step is to create a link. The link is a new file with a special type .qref (questionnaire reference). You create it by saving the ROPOT description using the "Save and make accessible" button. The default location of the link is in the Study Materials / ROPOT (Revision, Opinion Poll and Testing) folder. You can change this location by using the "Change" button in the "Making the ROPOT application accessible to students" option by inserting a different address.

Students enrolled in the course also see a link to the ROPOT on their student page where all e-learning related links are collected:

The keys (passwords) for the ROPOT are used to restrict access to the ROPOTs. If a key is required, the ROPOT is closed even for persons who have the right to work with the ROPOT in the given time interval.

The teacher usually uses the key (password) when he/she does not know exactly when the students will take the ROPOT. Typical use is, for example, in seminars where ROPOTs are taken every week. The teacher sets an interval in the ROPOT description for answering throughout the seminar, but only makes it available to students by handing in the key (password) when he or she deems it appropriate. This will ensure that students do not access the ROPOT until instructed to do so.

Universal key and individual keys

Each group of rights and times has its own key generated. Furthermore, one universal key is created. This key unlocks the ROPOT for all those who have the right to work with the ROPOT. A second possible universal key unlocks the ROPOT for all special rights and times groups. Individual keys will always unlock the ROPOT for a given rights and times group.

Universal and individual keys are available to instructors on the "Fill in the ROPOT form" page in the "Rights and Time Restrictions" section:

Where do students insert the keys?

Students have a box to insert a key next to the "Launch the new ROPOT application" button.

Yes, you can. In addition to automatic evaluation (i.e. where the student's answers are evaluated according to pre-set scores), there is also the option of manual evaluation of answers. This mode of evaluation must first be enabled in the ROPOT description.

Where do I add my manual evaluation to the student's answers?

After answering the ROPOT, student answers are displayed in the Responses application. The "Evaluate manually" button appears in batch operations. The button is also displayed if the option is not set in the ROPOT description and leads to its activation.

Manual evaluation can be entered for each question separately by clicking on "Evaluate manually" in the submitted ROPOT session.

Both text and scores can be entered in the manual evaluation field. Points always has to be marked with an asterisk. The left panel shows the number of points awarded automatically, manually and the total number of points.

If the teacher is working on the evaluation of more than one question, the manual evaluation can be saved in bulk by clicking on "Uložit všechny změny v ručním hodnocení" (i.e. Save all changes in manual evaluation in English).

Where the manual evaluation is stored?

Manual evaluations are stored in the notebook. The teacher can choose whether this notebook is published to students immediately, not at all, or only after a certain date. If the teacher does not wish to save the content in the notebook, then the option should be checked there, "Nechci obsah propisovat do poznámkového bloku" (i.e. I don't want to store the content in the notebook in English) The manual evaluation will still be available to the teacher in the Responses application.

The notebook created by the "manual evaluation" mode will be marked as such.

In what format is the manual evaluation displayed in the notebook?

Depending on the teacher's preference, the manual evaluation in the notebook will be displayed as full text with points (which are always marked with an asterisk), points only or total sum of points. Manual evaluation can also be listed for each question separately.

The notebook abbreviation option is used when the content is to be included in the custimized addition notebook.

What effect does the setting of the "Saving students' scores to a notebook" section have on the notebooks created by manual evaluation?

None, these are different notebooks with different content.